How To Fix Driver Power State Failure Error In Windows 11

There are several types of Blue Screen of Death issues, sometimes known as BSOD faults, that can appear with Windows 11. One of these Blue Screen issues is the DRIVER POWER STATE FAILURE error, which can occur for a multiplicity of factors including mismatched drivers, corrupted system files, wrong power parameters, broken hardware, and viruses. Don’t be frightened if you experience the Blue Screen of Death with Windows 11. All blue screen issues will appear the same and display the same message: “Your PC encountered a problem and must restart.” We’re only gathering error information before restarting it for you. However, each failure has a unique identifier that helps to recognize the type of issue. Stop error code – DRIVER POWER STATE FAILURE and/or 0x0000009F indicates a Driver Power State Failure Blue screen error.” This article will explain how to fix driver power state failure error in Windows 11.

Driver Power State Failure errors typically occur when a faulty or inappropriate device driver is implemented in your computer, or when power settings are wrong. The BSOD normally appears when you wake up the system from Sleep or Hibernation mode, or when you load up the system.

Most of the time, a simple restart will resolve the issue; nevertheless, you may still utilize the following remedies to avoid the error in the future. Let’s look at how you may fix the driver power state failure problem in Windows 11.

Restart your computer to resolve the Driver Power State Failure Error

When this issue occurs, you may resolve it spontaneously by rebooting your computer. When a device driver goes to sleep while you are still using it, the Driver Power State Failure error occurs. So rebooting the system clears the memory and re-initializes all peripherals.

Pick Startup Repair from the Advanced Options menu

Method 1

When Windows starts up, you may encounter the Driver Power State Failure or Blue Screen issue, which causes Windows to malfunction or prevents you from logging in. When this happens, you have no alternative other than to use startup repair or boot into safe mode to resolve the issue.

To get the Startup Repair option from the Advanced Options, reboot your machine from the Windows installation disc (USB or DVD).
Start your pc by booting from the Windows 11 bootable disc. If you do this, the Windows Setup screen will appear, with two options: ‘Install’ and ‘Repair your Computer.’ Finally, in the lower-left corner of the window, select ‘Repair your Computer.’
This will display the Choose an option (Windows Recovery Environment) window; there, pick the ‘Troubleshoot’ option.
On the next screen, select ‘Advanced options.’ and then pick the ‘Startup Repair’ alternative.

Method 2

If you don’t have bootable Windows Installation CDs, there’s another option to get through the Windows Recovery Environment.

To begin, reboot or start your system, and then, as soon as you see the loading screen, hold down the power button for 5 seconds to close it down. Repeat this procedure three or four times more until you reach the Windows Recovery Environment dialog.
Choose the ‘Advanced options’ option here and then press the ‘Startup Repair’ button.
After that, Windows will restart automatically, checking for and repairing any issues.

Method 3

You may also enter Advanced settings from the Windows Settings menu. This is how you do it:

Look for ‘Recovery options’ in the Start menu and choose the finest result. Instead, click Settings and go to the System tab and choose the ‘Recovery’ option.
Tap the ‘Restart immediately’ option next to Advanced startup on the Recovery settings screen.
This will restart your laptop and reveal the Windows Recovery Environment; from here, pick the ‘Startup repair’ button as we demonstrated in a second way.

The Steps to Enter Safe Mode

If your computer system is on the blue screen or the Driver Power State Failure, you can start it in Safe Mode and solve that problem with any of the options listed below. There are several methods for entering Safe mode If you’re not sure how to enter boot mode, try these steps:

Safe mode is a diagnostic mode that permits people to log in to the system in its most basic configuration, with only the necessary drivers, applications, and data. It will not launch the drivers and programs that commonly generate Driver Power State issues (such as graphics drivers and audio drivers).

Procedure 1

To begin, reboot your PC with Windows 11 bootable media or via the Advanced Startup option. Next, in the Windows Recovery Environment, repeat the procedures outlined above to access the ‘Advanced Options.’ Now you need to click on the ‘Startup Settings’ button.
To alter the Windows choices, hit the ‘Restart’ button on the following screen.
After that, your system will reboot and present the screen, then in order to enter safe mode, hit the number key 4 or F4.
Once the machine has booted into Safe mode, you may attempt to resolve the issue that is producing the BSOD error. In addition, Safe Mode is the best approach to deleting any freshly installed drivers.

Procedure 2

You can also activate boot mode utilizing the System Configuration application’s boot settings.

Use Win+R to launch the Run command, then type MSConfig and hit Enter. You may also access it by searching for ‘System Configuration’ in the Windows search.
Navigate to the ‘Boot’ tab in the System Configuration tool and tick the ‘Safe boot’ option under the Boot settings section. Then, beneath it, you have to pick ‘Minimal’ and press ‘OK.’
Your next job is to click the ‘Restart’ option to reboot the computer and enter safe mode.

To Resolve Driver Power State Failure, Uninstall Device Drivers

In rare circumstances, the freshly installed driver may have defects that contribute to this problem. This is how you do it:

To begin, launch Device Manager by right-clicking the Start button and picking ‘Device Manager.’ When the Device Manager loads, choose the driver generating the BSOD issue from the display. If you are unsure, review your BSOD dump logs for more information. Then, you need to right-click the device and choose “Uninstall device.”
Now, in the next stage, you should tap the ‘Uninstall’ button in the confirmation window.
After removing the driver, restart the system to have it reinstalled instantly. You may also go to the manufacturer’s website and download and install the most recent version of the driver for Windows 11.

Conclusion

We hope this information has assisted you in resolving the driver power state failure problem in your device.