Home Network Problems? Diagnostic Tricks And Fixes To Try [#2023]

Byadmin

Network troubles are the most serious of all pc issues that could happen to any of us. Even while our computers can perform a lot of tasks without an internet connection, it isn’t enjoyable. Even worse, it’s more challenging to look up solutions to your issue when you can’t access the internet. Let’s walk over the fundamental steps for troubleshooting network connectivity issues. You’ll be prepared to respond the next time a Cannot Connect notification appears in your web browser if you do this. So, today, this article will explain the diagnostic tricks and fixes to try for home network problems.

Inspect other connections, then restart all of your devices

We will begin generically and focus on the details, as with any troubleshooting. To make sure your connection is stable after each step, try connecting to a website.

Network problems shouldn’t be taken seriously immediately because the solution may be as easy as restarting your hardware. Make doubly sure reloading is your initial response to network difficulties as well because it often resolves issues.

  • Reboot your computer, along with your modem and router, to begin troubleshooting. You may deactivate your modem and router by pressing the power buttons located on the backs of each device or simply pull the power plugs if not.
  • Sit tight for 60 seconds before turning the connection and network back on so that the archives are completely cleared. Before reconnecting your modem, plug in your modem first and let it completely turn on before you link anything.
  • Initially shutting everything off and back on makes sure it isn’t a transient network issue. Rebooting now is preferable to waiting another 30 minutes when you don’t have to.
  • In case, you have a secondary desktop (or a mobile device) that you may consider using to get online once you’ve rebooted. Once you discover that no devices can connect, your ISP or hardware is probably at fault.
  • If you discover that only one machine cannot connect to the internet, you can further focus on the issue. Run an antivirus check on that device to make sure malware isn’t compromising your internet. Furthermore, ensure that the connection is not being blocked by your firewall’s settings.
  • To examine whether your default browser is somehow incorrectly set, consider utilizing a different one as a last resort. If you’re experiencing “your connection is not private” issues across all websites, this is a different problem with security certificates.

Physical network connections should be checked in order to solve the issue

You should next investigate to ensure that all physical network connections are in order if your network issue still exists after restarting. Make doubly sure the Ethernet cable is not broken or disconnected before attempting to attach it to your router. Make damn sure the wireless button on your laptop is not in the off position if it has one.

Verify your router and modem once you’ve made sure the network is working properly. Are the modem and router LEDs glowing green normally? After rebooting, the gadget can be dormant or inoperable if no lights are turned on.

On the other hand, if you see red lights or a power signal but no connection led, your ISP is probably having problems.

Windows Network Troubleshooter should be utilized in order to solve the problem

Some built-in problem solvers in Windows may locate and resolve problems independently.

  • To do this, you need to right-click the network symbol in your System Tray and select Troubleshoot Problems to launch the network troubleshooter.
  • You may also activate the troubleshooter by selecting Internet Connections > Run the troubleshooter under Settings > Update & Security > Troubleshoot > Additional troubleshooters.
  • Once the debugger has finished, it may detect problems but are unable to correct them, resolve problems, or return no results. Try to connect once again if the troubleshooter discovers a problem that it can resolve.
  • Make a note of the name of any mistake or issue that Windows cannot automatically repair so that you may further investigate it.

Verify Your IP Address to Make Sure It’s Reliable to Solve the Issue

By this time, you’ve confirmed that the issue is permanent and that all of your gear functions as intended. You must identify the location on the connection where the network issue is happening because Windows is unable to solve it.

  • Trying to make sure that there are no unexpected IP settings enabled is a good option. Navigate To settings and scroll to Network & Internet > Status to verify this.
  • Next, you will pick  Change adapter parameters from the drop-down menu under Advanced network settings and then double-click the connection type in the ensuing popup.
  • After that, a status box will appear, and you should click the Properties option there and then double-click the Internet Protocol Version 4 item in the ensuing dialogue.
  • Make absolutely sure that both Obtain an IP address automatically and Obtain DNS server address automatically are marked, if you have not configured a static IP address.
  • If Internet Protocol Version 6 is implemented, repeat the steps to guarantee that everything is automated there as well.

Speak with your ISP in order to resolve the issue

If the aforementioned procedures are accomplished, you will have successfully demonstrated your hardware’s functionality and validated that you are using a router’s IP address. Additionally, you can be certain that the issue affects a number of devices and happens independently of the network. If this is the scenario, checking to see if your ISP is having problems is your best next step.

This is when having a smartphone comes in handy since you can seek an interruption map for your operator. Following that, you may go on Twitter to determine whether anyone else in your region is having similar problems. Probably call your ISP to examine if there are any recognized failures if you don’t notice anything noteworthy online. A technician should be equipped to do testing to determine whether line problems are just impacting a local region.

There is little you can do but wait until you’ve informed your ISP of the problem and established that more than one PC is having trouble.

Conclusion

So, finally, these are some of the useful tips and diagnostics you can try in order to solve home network problems.