4 Ways To Fix DPC Watchdog Violation Error In Windows 11 – Step By Step Guide #2023

Byadmin

Everybody is familiar with Blue Screen of Death problems, and with Windows 11, a Black Screen of Death error is similar. One of the black screens of death errors is DPC Watchdog Violation. The error is most likely to occur when the Deferred Procedure Call) the procedure takes a bit longer than it should. So, in this post, we will learn about the 4 ways to fix DPC Watchdog Violation error in Windows 11.

The problem first appeared in PCs with SSD storage systems that had an older or unsuitable operating system driver. However, issues such as damaged system files, and mismatched external devices can all occur on PCs. Furthermore, an unsuitable SATA AHCI driver has been found as a possible source of this problem.

Whichever the reason for the problem, BSOD issues may be discovered and handled at home. Because there might be several causes for this BSOD error, you may need to apply multiple fixes to resolve the problem.

First of all, you should remove all external hardware devices from the system

Because external gadgets linked to your computer might sometimes interfere with the operation of your PC. As a result, unplugging them and seeing if the problem still exists can’t hurt.

Consequently, disconnect any non-essential gadgets like hard drives or USB storage, printers, gaming devices, mice, and keyboards.

Check if the issue appears after disconnecting all peripherals. If the error does not appear after a while, reconnect the external devices one at a time to see which one is incompatible with your PC.

Once the external device has been recognized, you may upgrade the device’s driver to fix the problem on your PC.

On your pc, use CHKDSK to solve the issue

The command’s main objective is to know the integrity of the hard drive’s file system and make any required corrections. In addition, the command can be used to repair damaged sectors on your hard disc.

Employing File Explorer to run CHKDSK

If you’re not too tech-savvy, Windows lets you execute the CHKDSK command directly from the file explorer without having to enter any instructions in the Command Prompt.

  • To do so, go to your desktop and double-click on the ‘This PC’ item.
  • Now, from the context menu, right-click on the Windows installation disc and select ‘Properties.’
  • On the ‘Windows Properties’ panel, pick the ‘Tools’ tab, then the ‘Check’ icon in the ‘Error Checking’ section.
  • You may notice a prompt from the system claiming that there are no faults on the drive. If you still want to continue scanning, select the ‘Scan drive’ button from the popup.
  • It’s possible that the scan will take some time. Patience is required while the procedure is running in the background.

If you want additional control over the CHKDSK command, you may use the Command Prompt to run it.

Employing the Command Prompt to Execute CHKDSK

Although this technique lacks the simplicity of a GUI, it does provide total control and more flexibility in the use of commands through the use of attributes.

  • To find Terminal, go to the Start Menu and type Terminal into the search box. To continue, right-click on the ‘Terminal’ item in the results pages and pick the Run as administrator option from the context menu.
  • If you are not logged in with an admin account, a UAC (User Account Control) box will display on your computer. Type the credentials for one now, otherwise, use the ‘Yes’ box to proceed.
  • Then, on the Terminal window, press the carat logo (downward arrow), and then choose the Command Prompt option from the expanded list. Additionally, you may do so by pressing the Ctrl+Shift+2 keys on your keyboard.
  • Now, in the Command Prompt window, write or copy+paste the command listed below and hit Enter.

chkdsk /f

  • Because the drive cannot be used while the program is operating, you may be prompted to schedule the CHKDSK procedure.  You need to hit Y on your keyboard to schedule.
  • Finally, reboot your pc by shutting it down from the Start Menu. Before the PC powers up, the CHKDSK utility will begin scanning the storage disc.

Implementing the Command Prompt, conduct the SFC and DISM scans:

The first step is to conduct a System File Checker (SFC) and Deployment Image Servicing and Management scan to see if any system files are broken or corrupted. And then you can repair them with fresh system files downloaded from Microsoft servers.

  • To do so, enter the Start Menu and run a search for Command Prompt. Now, from the search results, right-click on the ‘Command Prompt’ item and choose Run as administrator to launch the Terminal with administrative privileges.
  • You’ll get a UAC (User Account Control) screen where you need to enter credentials for an admin account.
  • Afterward, on your keyboard, write or copy+paste the command listed below and press Enter. This will start the DISM program on your computer, which will rebuild the system image utilized to restore your Windows computer.

DISM /Online /Cleanup-Image /RestoreHealth

  • The DISM command may need several minutes to complete relying on your internet connection speed.
  • Once that’s done, run or copy+paste the command below to start the SFC (System File Checker), which will scan your existing Windows image and repair any problematic files with the one you downloaded in the previous step.

SFC /scannow

  • After the SFC command has been completed, go to the Start Menu and restart your computer.

Return to a previous state of the system using System Restore Point

  • To restore your computer to a prior state, just go to Start Menu and look for the Settings app, which you may find by selecting its tile in the ‘Pinned applications’ column.
  • Next, on the left sidebar of the Settings window, make sure you’ve picked the ‘System’ option.
  • To proceed, scroll to the bottom to the ‘About’ tile in the right area of the window and click it.
  • Then, in the ‘Related links’ part of the next window, discover and pick the ‘System protection’ option.
  • Locate and click on the ‘System Restore’ icon in the newly opened window.
  • Afterward, from the ‘System Restore’ window on your computer, press the ‘Next’ button.
  • Furthermore, from the menu in the dialogue, pick to select a System Restore point. After which, if you want to check which applications/apps will be affected by the restoration, select the ‘Scan for affected programs’ option.
  • Following that, you’ll be able to see details about the ‘Restore Point’ you’re recovering your computer from on the following screen. Thereafter, properly follow the warning on the screen before pressing the ‘Finish’ button to begin.

Your Windows PC will immediately reload and return to its former state of functioning.

Conclusion

Finally, these are the 4 ways you can use to fix DPC Watchdog Violation error in Windows 11 on your device.